VRF Systems Adaptor & Convertor

For external device

Software

UTY-ABGXZ1

It is possible to connect medium to large sized BMS to VRF network system via BACnet®, a global standard for open networks.
A maximum of 1600 indoor units with 4 VRF network systems (a maximum of 400 indoor units & 100 outdoor units for one network system) can be connected to one BACnet® Gateway.
It is possible to control or monitor VRF network system from BMS via BACnet® Gateway.
Compatible with BACnet® (ANSI / ASHRAE-135-2014) application specific controller (B-ASC).
Compatible with BACnet®/IP over Ethernet.
Scheduling function, Alarm & Event functions as well as Electricity Change Apportionment function are provided in BACnet® Gateway.
Connection between VRF network system to personal computer is possible via small U10 USB interface. However, both U10 USB interface & personal computer are field supplied items.
Corresponds to 7 different languages, English, Chinese, French, German, Spanish, Russian, Polish.

UTY-VBGX

BACnet® Gateway enables to connect a BMS and FG VRF system.
A maximum of 128 indoor units and 32 refrigerant system can be connected to a single BACnet® Gateway.
Compatible with BACnet® (ANSI / ASHRAE-135-2012) application specific controller (B-ASC).
Compatible with BACnet®/IP over Ethernet.

UTY-VLGX

For connection between VRF network system and a LONWORKS® open network for management of small to medium-sized BMS and VRF network system.
The UTY-VLGX permits central monitoring and control of a VRF network system from a BMS through a LONWORKS® interface
Up to 128 Indoor units can be connected to one Network Convertor for LONWORKS®

UTY-VMGX

Compact and lightweight design
Direct connection to MODBUS Network
Up to 128 indoor units can be controlled in one MODBUS Convertor
The MODBUS Convertor permits central monitoring and control of air conditioners from BMS or Central Controller.

FJ-RC-MBS-1

Simple installation due to small and compact size.
No separate external power supply required.
The Modbus Interface permits central monitoring and control of air conditioners from BMS.

UTY-VKGX

New KNX Convertor enables to connect central/home controller and FG VRF system.
A maximum of 128 indoor units and 100 outdoor units can be connected to single KNX Convertor.

FJ-RC-KNX-1i

Simple installation due to small and compact size.
No separate external power supply required (just KNX bus power).
Can be used for single indoor units and group controlled (up to 16) indoor units

FJ-RC-WIFI-1

It is the most advanced solution to remotely manage an Air Conditioning system using all sort of mobile devices such as Smartphones, Tablets and PC
No separate external power supply required
Can be used for single indoor units and group controlled (up to 16) indoor units

UTY-VKSX

UTY-TERX

In combination with a field supply Card-Key Switch or other sensor, the External Switch Controller allows control of the ON / OFF, Room temperature, Fan speed and Master control functions. This makes this product suitable for installations such as hotel rooms.
Card-key or other sensor switches are available as a locally purchased parts.
2-wire type
The set temperature can be specified at two points for cooling and heating individually (4 points).

UTY-VTGX (DC power supply type)

The network convertors are required when connecting single split system to VRF network system.
Compact and light weight design
Connectable to both types of 2-wire and 3-wire remote controllers

UTY-VTGXV (AC power supply type)

The network convertors are required when connecting single split system to VRF network system.
Compact and light weight design
Connectable to both types of 2-wire and 3-wire remote controllers

UTY-VSGXZ1

Transmission Line length can be extended up to 3,600m with multiple Signal Amplifiers.
Up to 40 signal amplifiers can be installed in a VRF network system.
A signal amplifier is required,
(1) When the total wiring length of the transmission line exceeds 500m.
(2) When the total number of units on the transmission line exceeds 64.

UTY-TTRXZ1

Thermostat convertor can control Fujitsu General products using a third party thermostat. Up to 16 indoor unit can be connected with one thermostat convertor.